• display as grid Grid
  • display as list List
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | | Last

Attenuation and Infiltration Filter
Attenuation and Infiltration Filter
Attenuation and Infiltration Filter This specialised filter retains all debris in a stainless steel basket such that no dirt is washed away into the soak away or infiltration structure. The filter basket made of stainless steel is easily removed with a removal handle. This filter is very suitable for equipments where the water is used in washing machines, toilet flushing and garden watering, and...
£215.00 ex VAT
(£258.00 inc VAT)
Attenuation Infiltration Filter with Telescopic Extension
Attenuation Infiltration Filter with Telescopic Extension
Filter for installation in the ground before the rainwater tank This specialised filter retains all debris in a stainless steel basket such that no dirt is washed away into the soak away or infiltration structure. The filter basket made of stainless steel is easily removed with a removal handle. This filter is very suitable for equipments where the water is used in washing machines, toilet flushing...
£285.00 ex VAT
(£342.00 inc VAT)

Garden Filter
Garden Filter
Garden Filter A total retention rainwater filter with integrated dirt collecting basket at mesh width of 1 mm. The filter basket is easily removed with a removal handle. Installation in a rainwater tank or turret, or before a tank in the ground using the 3P Telescopic Extension Set with lid. This filter is very suitable for equipments of watering the garden and for sites in which the rainwater...

5

£155.00 ex VAT
(£186.00 inc VAT)
Garden Filter with Telescopic Extension
Garden Filter with Telescopic Extension
Garden Filter with Telescopic Extension Garden Filter with plastic shaft extension tube for direct installation in the ground before the rainwater tank, with locking lid. The extension tube is telescopic, so it can be cut to the correct height. It is therefore simple to use and install. How it works: 1. Rainwater is led onto the filter cartridge. 2. The dirt is detained in the dirt collecting...
£210.00 ex VAT
(£252.00 inc VAT)

Patronen FilterPatronen Filter
Patronen Filter
Patronen Filter Rainwater filters for the installation in rainwater tanks. Due to the inclined angle of the filter sieve and its very smooth surface structure, the dirt is rinsed into the sewer. Filter cartridge mesh is stainless steel within a plastic housing. Manufactured by 3P Technik. Low maintenance, the filter has to be cleaned depending on the contamination several times during the year. Connection...

3

£215.00 ex VAT
(£258.00 inc VAT)
Rainus Downpipe FilterRainus Downpipe Filter
Rainus Downpipe Filter
Rainus Downpipe Filter - 3P Technik Rainwater filters for installation in the lower section of the downpipe. It is easy to monitor due to its installation position in the downpipe. No need to lift heavy lids or to climb down into storage tanks, as required when filters are installed underground. This downpipe filter allows the cleaned rainwater to flow out down the filter pipe. Manufactured by...
£110.00 ex VAT
(£132.00 inc VAT)

Rainwater Filter CollectorRainwater Filter Collector
Best Seller
Rainwater Filter Collector
Rainwater Filter Collector - 3P Technik Filters and collects rainwater for the best possible water quality. Suitable for roof sizes up to a maximum of 90 sq metres. Designed to fit directly with the 3P Wall Tank (Universal Link Kit available for use with other tanks). Once the tank is full, the filter acts as the overflow outlet. The Filter Collector leads cleaned water to the storage tank, with...

5

from £34.00 ex VAT
(£40.80 inc VAT)
Rainwater Filter Collector with Universal LinkRainwater Filter Collector with Universal Link
Best Seller
Rainwater Filter Collector with Universal Link
Rainwater Filter Collector with Universal Link Description Rainwater Filter Collector and Universal Link Kit The Filter Collector can connect to any tank or water butt with the aid of the Universal Link Kit. The Filter and the link kit are packaged together and contains everything needed for installation. Manufactured by 3P Technik. Suitable for roof sizes up to a maximum of 90 sq metres....

5

from £46.75 ex VAT
(£56.10 inc VAT)

Rainwater-Pump-Mesh-Filter
Rainwater-Pump-Mesh-Filter
Rainwater-Pump-Mesh-Filter 200 micron steel mesh filters to fit Divatronix Manifold (part code: 0019288), to fit Ebara Multigo Pump (Product Code: 0012115)
£48.73 ex VAT
(£58.48 inc VAT)
Sinus FilterSinus Filter
Sinus Filter
Sinus Filter Rainwater Filter for installation within rainwater tanks. Ideal for conversion of existing tanks, because the 3P Sinus Filter has no height difference between rainwater inlet and outlet to the waste water sewer. The filter cartridge lies diagonally in the housing, therefore even more water can be in comparison to conventional filters. Low maintenance, depending on the contamination. Connection...
£230.00 ex VAT
(£276.00 inc VAT)

Telescopic Extension onlyTelescopic Extension only
Telescopic Extension only
Telescopic Extension only This extension allows for easy adjustment of height proportions during installation on site. If needed, the telescopic extension can be shortened. Additionally, multiple extensions can be used if required. Extending the height of a selection of their Rainwater Harvesting Filters from a minimum of 250mm to up to 750mm. Compatible with: VF1 Filter, VF1 Combi...
£85.00 ex VAT
(£102.00 inc VAT)
Twin FilterTwin Filter
Twin Filter
Twin filter rainwater filter for larger roof areas The Twin Filter can be installed in a pilot shaft or in frost-protected regions directly on the wall. Normally, standard concrete shafts are used (? 1000 mm). The filter can be delivered to the site pre-installed in the shaft. Two-step cleaning system, therefore high level of filtering efficiency, independent of flow rate. Due to the steep inclination...
£635.00 ex VAT
(£762.00 inc VAT)

Volume Filter
Volume Filter
Volume Filter Rainwater filters for installation in rainwater tanks and also in the ground before the tank Two-step cleaning system, therefore high level of filtering efficiency, independent of flow rate. Due to the steep inclination of the filter cartridge, the dirt is continuously cleaned away into the sewer. Frost resistant. Self-cleaning. Low maintenance intervals, filter insert is easily...
£320.00 ex VAT
(£384.00 inc VAT)
Zisternen FilterZisternen Filter
Zisternen Filter
Zisternen Filter Rainwater filter for installation in rainwater tanks. Two step cleaning system. The first coarse filter mesh protects the second, finer mesh by removing larger leaves and particles. The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry. Ideal for roof areas up to 150m² Height...

1/2'' Stainless Steel Thermostat Pocket1/2'' Stainless Steel Thermostat Pocket
1/2'' Stainless Steel Thermostat Pocket
1/2 inch BSBT Stainless Steel Thermostat Pocket Range – Stainless Steel Thermostat Pocket 1/2″ Thread 100mm in length Compatible with: Range Tribune HE (Caleffi Control) Cylinders Range Tribune HE 2 (RWC Control) Cylinders
£45.45 ex VAT
(£54.54 inc VAT)
10' Inline Filter Cartridge, 5 Micron
10' Inline Filter Cartridge, 5 Micron
5 Poly Micron 10" White Cartridge Filter 5 Poly Micron 10 inch white cartridge filter for Rain Water UV system unit's.
£71.97 ex VAT
(£86.36 inc VAT)

160mm RUBBER GROMMET
160mm RUBBER GROMMET
160mm RUBBER GROMMET Description160mm RUBBER GROMMET
£5.21 ex VAT
(£6.25 inc VAT)
3.15 amp fuse for Green Panel3.15 amp fuse for Green Panel
3.15 amp fuse for Green Panel
3.15 amp fuse for Green Panel 3.15amp Motor-Blower fuse for the Small Green Control Panel. **Price is for 1 fuse **
£1.39 ex VAT
(£1.67 inc VAT)

5 amp Fuse for Green Panel
5 amp Fuse for Green Panel
5 amp Fuse for Green Panel Description 5amp Motor-Blower fuse for the small Green Control Panel. **PRICE IS FOR X1 FUSE**
£2.79 ex VAT
(£3.35 inc VAT)
Aeration Blower Housing Clips
Aeration Blower Housing Clips
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete) - Tanks Direct (tanks-direct.co.uk)
£0.57 ex VAT
(£0.68 inc VAT)

Anti-Rotation Washer
Anti-Rotation Washer
Anti-Rotation Washer Description Anti-rotation washer fitted to all Biodisc and Biotec lid locks
£2.17 ex VAT
(£2.60 inc VAT)
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel Panasonic pinion wheel is suitable for Klargester B1-B2 FA to FC treatment systems. Suited for Panasonic gearboxes.
£100.72 ex VAT
(£120.86 inc VAT)

BA-BB-Biodisc-Lid-Extension-Neck-550mm
BA-BB-Biodisc-Lid-Extension-Neck-550mm
BA-BB- Invert 550mm extension neck BA-BB- Invert 550mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework Materials:Glass Reinforced Plastic (GRP)
£283.96 ex VAT
(£340.75 inc VAT)
BALE ASSEMBLY P012
New
BALE ASSEMBLY P012
BALE ASSEMBLY P012 Filtration Media to Suit Biotec P012 Sewage Treatment Systems Note, Enkamat Netting/Matting sold separate (2 metres suared is advised for this)
£373.42 ex VAT
(£448.10 inc VAT)

BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt (1800mm) Replacement heavy-duty drive belt to suit Klargester BC BioDiscs manufactured pre-2006. 140no Teeth 8mm Pitch 20mm Wide Standard Duty HTD Belt The motor on these Biodisc Units high up in the tank and offside from the rotor.
£41.95 ex VAT
(£50.34 inc VAT)
BC Bottom PulleyBC Bottom Pulley
BC Bottom Pulley
BC Bottom Pulley The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems. 30mm wide 8mm pitch 65mm Plain bored 80 Teeth Torerance H9 Note, when changing these the locking element needs removed first. It is advised that the locking element is changed when changing the bottom pulley
£73.86 ex VAT
(£88.63 inc VAT)

BC Pulley Locking Element
BC Pulley Locking Element
BC Pulley Locking Element This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
£20.72 ex VAT
(£24.86 inc VAT)
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer) This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. Bauer 2000 Series helical geared motor Supply: 230V/50Hz/1PH Output power 0.120 kW Output torque 136 Nm Output speed 8.3 rpm Terminal box mounting B3 Terminal box position I/A Terminal...
£892.45 ex VAT
(£1,070.94 inc VAT)

BF/BG Drive End Bearing (45mm)BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm) The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£296.67 ex VAT
(£356.00 inc VAT)
BF/BG Non Drive End BearingBF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
£296.67 ex VAT
(£356.00 inc VAT)

BG-Bottom-PulleyBG-Bottom-Pulley
BG-Bottom-Pulley
BG-Bottom-Pulley This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft. This requires a BG Pulley locking element
£239.35 ex VAT
(£287.22 inc VAT)
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
BG Top Pulley Bio Disc The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BG top pulley comes with a grub screw to lock into position 19T 3/4 INCH DUPLEX PINION BORED 30mmF7
£74.50 ex VAT
(£89.40 inc VAT)

BH BJ Motor Gearbox BauerBH BJ Motor Gearbox Bauer
£4,238.80 ex VAT
(£5,086.56 inc VAT)
Biodisc Adaptor BracketBiodisc Adaptor Bracket
Biodisc Adaptor Bracket
Biodisc Adaptor Bracket This biodisc bracket is manufactured to mount the motor on a B1-B2 Biodisc Sewage Treatment System to convert Panasonic from Stephan motor/gearbox. Fully Galvanised 6mm mild steel plate Weight: 2.79Kg
£74.03 ex VAT
(£88.84 inc VAT)

Biodisc Grab Handle
Biodisc Grab Handle
BioDisc Grab Handle Black plastic Klargester Biodisc Handle to suit cover
£7.59 ex VAT
(£9.11 inc VAT)
BIODISC NYLON BEARING (RETROFIT)
BIODISC NYLON BEARING (RETROFIT)
BIODISC NYLON BEARING Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems. This bearing has a 25mm internal diameter and a closed off side (as pictured). For a full set, you will need x2,
£64.49 ex VAT
(£77.39 inc VAT)

Charles Austen Air Blower ET100Charles Austen Air Blower ET100
Charles Austen Air Blower ET100
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key Features Green...
from £104.99 ex VAT
(£125.99 inc VAT)
Charles Austen Air Blower ET120Charles Austen Air Blower ET120
Charles Austen Air Blower ET120
ET-120 Charles Austen Blower Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key...
from £124.95 ex VAT
(£149.94 inc VAT)

Charles Austen Air Blower ET150Charles Austen Air Blower ET150
Charles Austen Air Blower ET150
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key Features Green...
from £237.99 ex VAT
(£285.59 inc VAT)
Charles Austen Air Blower ET200Charles Austen Air Blower ET200
Charles Austen Air Blower ET200
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key Features Green...
from £295.95 ex VAT
(£355.14 inc VAT)

Charles Austen Air Blower ET250
New
Charles Austen Air Blower ET250
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key Features Green...
from £424.95 ex VAT
(£509.94 inc VAT)
Charles Austen Air Blower ET60Charles Austen Air Blower ET60
Charles Austen Air Blower ET60
The ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use. Applications: Sewage Aeration Aquatic Oxygenation Spas / Whirlpools Water Features Product Features Green drive technology - energy efficient motors so low power consumption Specially formulated diaphragm material for extended life Due...
from £73.99 ex VAT
(£88.79 inc VAT)

Charles Austen Air Blower ET80Charles Austen Air Blower ET80
Charles Austen Air Blower ET80
The ET80 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use. Applications: Sewage Aeration Aquatic Oxygenation Spas / Whirlpools Water Features. Product Features Green drive technology - energy efficient motors so low power consumption Specially formulated diaphragm material for extended...

5

from £85.99 ex VAT
(£103.19 inc VAT)
Charles Austen ET60-80 Filter
Charles Austen ET60-80 Filter
Charles Austen ET60/ET80 Filter This filter is suitable for use with the Charles Austen ET60 & ET80 Air Pump. Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pump's flow up to 30% and cause possible overheating. Note, these can not be returned once opened. Please make sure it's the correct kit for your blower. ...
£3.99 ex VAT
(£4.79 inc VAT)

Coalescer Foam Filter - nsbd 165x80x550Coalescer Foam Filter - nsbd 165x80x550
Coalescer Foam Filter - nsbd 165x80x550
COALESCER FOAM FILTER - NSBD Klargester Full Retention Separator Foam Filters - nsbd Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
£88.58 ex VAT
(£106.30 inc VAT)
Diaphragm Kit for EL-60N
Diaphragm Kit for EL-60N
Diaphragm Kit for EL-60N The SE60D Diaphragm Kit is suitable for EL-60N Blowers. This kit contains: 2x EL diaphragms plus their plastic surrounding frame 4x spacer strips to help with reassembly Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
£29.95 ex VAT
(£35.94 inc VAT)

Diaphragm Kit for EL60 / EL80 / EL100
Diaphragm Kit for EL60 / EL80 / EL100
Diaphragm Kit for EL60 / EL80 / EL100 This Diaphragm Set is suitable for EL Blowers (EL 60 / EL80 & EL100) This kit contains: 2 x EL diaphragms plus the plastic surrounding frame 4 x spacer strips to help with reassembly Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
£35.95 ex VAT
(£43.14 inc VAT)
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM SET -JDK 60-120 - The SE24 Diaphragm Kit is suitable for Secoh JDK 60–120 Blowers, including: JDK-S-60 JDK-60C JDK-S-80 JDK-80C JDK-S-100 JDK-100C JDK-S-120 JDK-120C The kit contains: 2x JDK diaphragms, plus their plastic surrounding frame Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...

5

£35.99 ex VAT
(£43.19 inc VAT)
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | | Last